MIL-DTL-83513 allows the use of low-cost stamped contacts; however, the Glenair Micro-D connector features the high performance TwistPin contact system. Glenair M83513 connectors are 100% Made in USA. Glenair’s industry-leading Micro-D capacity and capabilities offer quick worldwide access to the full range of QPL items. In addition to the general specification, MIL-DTL-83513 contains a total of 33 Detail Specification Sheets, nicknamed “slash sheets” because a forward slash is used in the numbering system.

Being only 20 miles away from Glenair’s headquarters, Air Electro is the leading authorized distributor for all the Glenair connector needs.

Glenair Micro-D Connector Series Offerings

 

Glenair MIL-DTL-83513/01 & /02 Micro-D

This series is solder cup terminated featuring a metal shell. It also features gold-plated TwistPin non-removable contacts for solder termination to AWG #26 or smaller wire.

 

 

 

Glenair MIL-DTL-83513/03 & /04 Micro-D (Pre-Wired Crimp Terminated, Metal Shell Connector)

These connectors feature gold-plated TwistPin contacts and mil spec crimp termination. Specify aluminum shells for best availability. 100% tested and backpotted, ready for use. For lightest weight and smallest diameter, select M22759/33 space grade insulated wire.

 

 

 

Glenair MIL-DTL-83513/06 & /07 Micro-D (Solder Cup Terminated, Plastic Shell Connector)

Plastic Shell Solder Cup M83513 Connectors feature goldplated TwistPin non-removable contacts for solder termination to AWG #26 or smaller wire. These all-plastic connectors are more economical, lighter and smaller than metal shell versions.

 

 

 

Glenair MIL-DTL-83513/08 & /09 Micro-D (Pre-Wired Crimp Terminated, Plastic Shell Connector)

Micro-D Pre-Wired Pigtail connectors feature gold-plated TwistPin contacts and mil spec crimp termination. 100% tested and backpotted, ready for use. For lightest weight and smallest diameter, select M22759/33 space grade insulated wire.

 

 

 

Glenair MIL-DTL-83513/10 Thru /15 Micro-D CBR (Condensed Right Angle PCB Terminated)

High performance connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.

 

 

Glenair MIL-DTL-83513/16 Thru /21 Micro-D BR Right Angle PCB Terminated Connector

These high performance connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.

 

 

 

Glenair MIL-DTL-83513/22 Thru /27 Micro-D BS Straight PCB Terminated Connector

These high performance connectors feature gold-plated TwistPin contacts for best performance. PC tails are .020 inch diameter. Specify nickel-plated shells or cadmium plated shells for best availability. Solder-Dipped terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.

 

 

 

Glenair MIL-DTL-83513/28 Thru /33 Micro-D CBS Condensed Straight PCB Terminated Connectors

These space saving connectors take up less room on the PC board. PC tail spacing is .075 inch (1.9mm) between rows. This series also features threaded inserts. Stainless steel inserts are insert molded into plastic trays. These inserts provide a ground path from the PC board to the mating cable. Solder-Dipped terminals are coated with Sn60/Pb40 tin-lead solder for best solderability.

 

 

 

Contact us today to inquire about the solutions we offer with the Glenair MIL-DTL-83513 line.

Leave a Reply

Show Buttons
Hide Buttons